insigh.io board Web UI configuration scenario for setting up Cellular connection.

  1. Open the Web UI URL:
  2. login with username: admin and password: insighiodev
  3. Select Cellular
  4. Network details
    1. Set the APN (as provided by the network operator)
    2. Select the network technology to be used (GSM, NBIoT, auto). If the selected technology is not supported by the modem, auto-selection is enabled.
    3. Set the band of operation (applicable only for Pycom devices for now, default selection is band 20)
    4. Choose the communication protocol between MQTT (over TCP) and CoAP (over UDP). In case of doubt, keep the default selection (MQTT).
    5. Select between IPv4 and IPv6. (check with your mobile operator for the supported IP version)
  5. Set the API Keys
    • Use the API keys generated during device creation in console.insigh.io to provision the device. The keys can be retrieved by accessing the “Device Info View”.
    • Tip Autofill: After completing step “Create Device” keep the tab open in the “Device Info view”. Thus, during this step you can go back to the Device Info View and:
      • either manually copy/paste the corresponding keys to the fields
      • or press the Quick device data commands button and then copy JSON data button. Upon pasting these data to any of the fields, the data will be auto-imported to the appropriate fields.

Next step will be to Enable / disable measurements that will be run during the demo scenario.

cellular setup